Konserwacja I Naprawy - Stiga SMT 48 AE Manuel D'utilisation

KONSERwACJA I NAPRAwY

metalowe i poręcze, które mogą spowodować
uszkodzenie ostrzy.
■ Przeprowadzać smarowanie ostrzy w regularnych
odstępach czasu.
■ Przycinać żywopłoty i krzewy z liśćmi sezonowymi
(nowe liście co roku) w czerwcu i w październiku.
■ Przycinać rośliny wiecznie zielone w kwietniu i w
sierpniu.
■ Przycinać rośliny iglaste i inne krzewy szybko
rosnące co sześć tygodni od maja do października.
■ Przycinać żywopłoty i krzewy z liśćmi sezonowymi
(nowe liście co roku) w grudniu i w marcu.
■ Przycinać rośliny wiecznie zielone we wrześniu i w
lutym.
■ Przycinać rośliny iglaste i inne krzewy szybko
rosnące co sześć tygodni od października do marca.
6. KONSERwACJA I NAPRAwY
CLEANINg MAINTENANCE AND sTORAgE
Your tool has been designed to operate over a long period
of time with a minimum of maintenance. Continuous
satisfactory operation depends upon proper tool care
and regular cleaning.Your charger does not require any
maintenance apart from regular cleaning.
wARNING
Before performing any maintenance on the tool,
remove the battery from the tool. Unplug the charger
before cleaning it.
■ After use and before storage
■ After use, carefully clean the blades. After cleaning,
apply a film of light machine oil to prevent the blades
from rushing.
■ Regularly clean the ventilation slots in your tool using
a soft brush or dry cloth.
■ Regularly clean the motor housing using a damp
cloth. Do not use any abrasive or solventbased
cleaner.
■ Make sure all switches are free of debris before and
after use.
STORAGE
When storing or transporting the chain saw, always place
the protective cover over the chain saw blade. When the
tool will not be used for several months, ideally leave the
battery connected to the charger. Otherwise proceed as
follows:
■ Fully charge the battery.
■ Remove the battery from the tool.
■ Store the tool and battery in a secure and dry location.
The storage temperature must always remain in the
range of +10°C to +40°C. Place the battery on a level
surface.
■ Before using the tool after prolonged storage, fully
charge the battery again.
ENVIROMENT PROTECTION
Separate collection. This product must not be disposed
of with normal household waste. Should you find one day
that your Greenworks tools product needs replacement,
or if it is of no further use to you, do not dispose of it
with household waste. Make this product available for
separate collection.Separate collection of used products
and packaging allows materials to be recycled and
used again. Re-use of recycled materials helps prevent
environmental pollution and reduces the demand for raw
materials.
BATTERIES
At the end of their useful life, discard batteries with due
care for our environment:
- Do not short-circuit the battery terminals.
- Do not dispose of the battery(s) in a fire as this may
result in a risk of personal injury or an explosion.
- Run the battery down completely, then remove
8
PL