Stiga SMT 48 AE Manuel D'utilisation page 67

3
EN
SAFETY wARNING FOR YOUR POLE
HEDGE TRIMMER
■ Keep all parts of the body away from the cutter blade.
Do not remove cut material or hold material to be
cut when blades are moving. Make sure the switch
is off when clearing jammed material. A moment
of inattention while operating the tool can result in
serious personal injury.
■ Carry the pole hedge trimmer by the handle with the
cutter blade stopped. When transporting or storing
the pole hedge trimmer always fit the cutting device
cover. Proper handling of the pole hedge trimmer
will reduce possible personal injury from the cutter
blades.
■ Hold the power tool by insulated gripping surfaces
only, because the cutter blade may contact hidden
wiring. Cutter blades contacting a "live" wire may
make exposed metal parts of the power tool "live" and
could give the operator an electric shock.
■ Keep cable away from cutting area. During operation
the cable can be hidden in shrubs and can be
accidentally cut by the blade.
■ Advice to check the hedge for foreign objects, e.g.
wire fences. Instruction to hold the hedge trimmer
properly. e.g. with both hands if two handles are
provided.
TRAINING
Provide the following instruction: Become familiar with
the owner's manual before attempting to operate the
equipment.
PREPARATION
■ Provide the following instructions.
■ a) THIS POLE HEDGE TRIMMER CAN CAUSE
SERIOUS INJURIES.
■ Read the instructions carefully for the correct
handling, preparation, maintenance, starting and
stopping of the pole hedge trimmer. Become familiar
with all controls and the proper use of the pole hedge
trimmer.
■ b) Never allow children to use the pole hedge trimmer.
■ c) Beware of overhead power lines.
■ d) Avoid operating while people, especially children,
are nearby.
■ e) Dress properly! Do not wear loose clothing or
jewellery, which can be caught in moving parts.
Use of sturdy gloves, non-skid footwear and safety
glasses is recommended.
■ f ) If the cutting mechanism strikes any foreign object
or the pole hedge trimmer starts making any unusual
noise or vibration, shut off the power source and allow
pole hedge trimmer to stop.
■ Remove the battery pack and take the following
steps:
■ inspect for damage;
■ check for, and tighten, any loose parts;
■ have any damaged parts replaced or repaired with
parts having equivalent specifications.
GENERAL SAFETY wARNINGS
■ g) Warn of the need for ear protection.
■ h) Warn of the need for eye protection.
■ i ) Instruct in how to stop the pole hedge trimmer in
an emergency.
SAFETY OF OTHERS
■ This appliance is not intended for use by persons
(including children) with reduced physical, sensory
or mental capabilities, or lack of experience and
knowledge, unless they have been given supervision
or instruction concerning the use of the appliance by
a person responsible for the their safety.
■ Children should be supervised to ensure that they do
not play with the appliance.
OPERATION
Pr ovide instructions for correct use and an indication
that the hedge trimmer should not be used for any other
purpose, as well as the following instructions.
■ a) Stop the engine before
■ cleaning or when clearing a blockage,
■ checking, carrying out maintenance or working on the
hedge trimmer,
■ adjusting the working position of the cutting device,
■ leaving the hedge trimmer unattended.
■ b) Ensure that the hedge trimmer is correctly located
in a designated working position before starting the
engine.
■ c) While operating the hedge trimmer, always ensure
that the operating position is safe and secure,
especially when using steps or a ladder.
■ d) Do not operate the hedge trimmer with a damaged
or excessively worn cutting device.
■ e) To reduce fire hazards, keep the engine and
silencer free of debris, leaves and excessive lubricant.
■ f) Always ensure that all handles and guards are fitted
when using the hedge trimmer. Never attempt to use
an incomplete hedge trimmer or one fitted with an
unauthorized modification.
■ g) Always use two hands to operate a hedge trimmer
fitted with two handles.
■ h) Always be aware of your surroundings and stay
alert for possible hazards of which you may not be
aware due to the noise of the hedge trimmer.
MAINTENANCE AND STORAGE
■ Provide the following instructions.
■ a) When the hedge trimmer is stopped for servicing,
inspection or storage, shut off the power source,
disconnect the spark plug wire from the spark plug
and make sure all moving parts have come to a stop.
Allow the hedge trimmer to cool before making any
inspections, adjustments, etc.
■ b) Store the hedge trimmer where the fuel vapour will
not reach an open flame or spark. Always allow the
hedge trimmer to cool down before storing.
■ c) When transporting or storing the hedge
■ trimmer, always fit the cutting device transport guard.