Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
7 - USER FUNCTIONS SETTINGS
7.1) MANUAL OPERATION
There are 2 manual modes, while the current program is stopped.
7.1/A) TEMPORARY MANUAL OPERATION
•
Briefly press the "
" key: the symbol "
level will be applied to the remaining hours of the day (example in fig. 44).
•
During manual operation, it is possible to set the desired temperature level by
pressing keys
t1 t2
,
or
t3
and/or set the desired temperature setting by pressing
the
keys directly.
The temporary manual mode will automatically terminate at midnight
of the current day.
If one or more of the
set
temperatures are changed during «manual» operation,
changes will be lost upon return to the usual program.
A shorter time can be set for temporary manual mode, as follows:
•
Press
OK
and the number of hours that temporary manual mode will be active fore
will blink on the display (example in fig. 45).
•
Set the desired duration with keys
46).
•
Once the set number of hours passes, it will return to the program operation.
•
To exit from the temporary manual mode, press "
will disappear from the display and the thermal scale of the day in progress will
appear on the display, according to the program in operation before the temporary
manual mode was activated.
From this function, you cannot ("
- press the
key to pass to suspending the program in order to clean
(paragraph 7.2)
- enter into P 04-Holiday program
This function can be combined with the
" will blink and the current temperature
, then press
OK
to confirm (example in fig.
", the blinking symbol "
ERR
" will appear):
MASTER
function (chapter 9).
.
.
.
0
2
4
6
8
10 12 14 16 18
temporary manual operation
.
.
.
0
2
4
6
8
10 12 14 16 18
"
.
.
.
0
2
4
6
8
10 12 14 16 18
t1
t2
t3
20 22
fig. 44
t1
t2
t3
20 22
fig. 45
t1
t2
t3
20 22
fig. 46
81
Publicité
Chapitres
Table des Matières
