Perry Electric 1TX CRTX Série Mode D'emploi page 86

7 - USER FUNCTIONS SETTINGS
While waiting or running the P04 program, you cannot exclude the chronothermostat "OFF" (see para. 7.7).
Once the countdown of the P04 Holiday program ends, the chronothermostat will adopt the season (winter or summer) of the previously
selected program. If P04 is selected and set in the first programming of the chronothermostat, the season adopted by default is "winter"
(P01).
Once the countdown is completed or interrupted, the data entered in the
The set temperature ( , t1 t2 and ) can be changed during P 04 HOLIDAY program (see paragraph 5.6).
You will need to enter the password if temperature
If the t3 Absence temperature is deselected permanently (see paragraph 6.5), the Holiday program will keep the connected
device (boiler or conditioner) disabled for the set duration.
If the chronothermostat is in
select the P 04 Holiday program. It will then return to the previously running function. If the chronothermostat is in
override, you can select the P04 Holiday program.
While program P04 is being run, you cannot use the function that suspends the cleaning program (see para. 7.2).
During P 04 Holiday program running, it is possible to activate the
TX) cannot be activated.
7.4) CHANGING THE TEMPERATURE SETTINGS: COMFORT (t1), ECONOMY (t2) AND ABSENCE (t3)
Refer to paragraph 5.6.
7.5) READING ENTERED WEEKLY PROGRAMS
Refer to paragraph 5.9.
7.6) CHANGING YEAR, MONTH, DAY, HOUR AND MINUTES
Refer to paragraphs 5.7 and 5.8.
86
t3
t3 (absence) is protected by a password
temporary manual forcing , the message
P 04 HOLIDAY program will be cleared.
.
Err will appear on the display for two seconds if you attempt to
Master function (see chapter 9), but
permanent manual
Master self-learning (MASTER