Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
5 - CHRONOTHERMOSTAT PROGRAMMING
All settings must be confirmed by pressing
chronothermostat returns to the previous settings after 3 minutes and
any changes made will not be saved.
Upon inserting the batteries or following a general reset, all sections that are on will
appear on the display, after which, the blinking digits relative to the year will appear,
as shown in figure 1.
For the chronothermostat to work you must set the following: current
year, month, day, hour, minutes, weekly program and, finally, coupling
of the chronothermostat to the receiver.
5.1/a) PROGRAMMING: YEAR (current)
•
Set the current year using the
decreases by a year and keeping the key pressed activates the rapid scroll.
Once the year is set press
OK
5.1/b) PROGRAMMING: MONTH (current)
•
After having confirmed the year, the month will blink on the display (1 = January).
Using the
keys, select the current month (
pressed activates the rapid scroll.
note: in case of an error, press the
Once the current month is set press
5.1/c) PROGRAMMING: DAY (current)
•
After having confirmed the month, the date will blink on the display (1 = first day of
the month). Using the
2 = Tuesday) will be shown automatically at the top of the display, to the right of the
message DAY. Keeping the key pressed activates the rapid scroll.
note: in case of an error, press the
Once the current day is set press
64
OK
keys, pressing repeatedly increases or
to confirm.
e.g.
3 = March). Keeping the key
key to return to year setting.
OK
to confirm.
keys, select the current date. The day of the week (i.e.
key to return to month setting.
OK
to confirm.
, otherwise the
t1
t2
t3
0
2
4
6
8
10 12 14 16 18
20 22
t1
t2
t3
0
2
4
6
8
10 12 14 16 18
20 22
t1
t2
t3
0
2
4
6
8
10 12 14 16 18
20 22
fig. 1
fig. 2
fig. 3
Publicité
Chapitres
Table des Matières
