Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
5 - CHRONOTHERMOSTAT PROGRAMMING
5.4) MODIFYING A WEEKLY PROGRAM (P 01, P 02 or P 03)
PREVIOUSLY SAVED AND SET
•
To change the previously saved settings of program
PROG key to enter into program display, press the
PROG) until the display shows the program number you want to change (
or
P 03
) fig. 14
, press
OK
(or
PROG key for 4 seconds
in fig. 15); if the day that is to be modified is not Monday, press
until the particular day is selected.
•
Use ,
t1 t2
or
t3
to edit the daily profile (example in fig. 15).
Keys
permit the user to move to the desired hour and this will be displayed.
When the key is pressed at h 23:00,
•
Press
OK
to save the daily profile, then move on to another day's profile or keep
the
OK key for 4 seconds
to save the new weekly program (fig. 16).
Editing the profile of one day will not affect the following day and
will only be saved for the day in question.
Press the
PROG
key to exit from the weekly program without saving any
changes.
P 01 P 02
,
or
keys (or else quickly press
)
to enter the editing (example
OK
once or more times
the time advances to 0:00.
.
.
.
P03, press the
0
2
P 01 P 02
,
.
.
.
0
2
press (one of the two keys)
for 4 seconds
.
.
.
0
2
t1
t2
t3
4
6
8
10 12 14 16 18
20 22
fig. 14
t1
t2
t3
4
6
8
10 12 14 16 18
20 22
fig. 15
or
t1
t2
t3
4
6
8
10 12 14 16 18
20 22
fig. 16
press for 4 seconds
69
Publicité
Chapitres
Table des Matières
