Perry Electric 1TX CRTX Série Mode D'emploi page 66

5 - CHRONOTHERMOSTAT PROGRAMMING
5.2) FIRST WEEKLY PROGRAM
• 3 programs can be freely programmed to your needs for each hour of the day on
three different temperature levels (
differently for each day of the week.
- Program P 01 is factory set for
accordingly. It is shown on the display by the symbol
- Program P 02 is freely programmable for
the display by the symbol
- Program P 03 is freely programmable for
the display by the symbol
Press the PROG key to enter into program display, press the
•
quickly press PROG) until the display shows the program number you want to
select. Programs P 02 (winter)
all the digits on the 24h scale related to
• Confirm the selection and enter into the setting procedure,
the PROG key) pressed for 4 seconds
The two digits t1 and t2 will appear blinking on the display, referring to the hour
and number corresponding to the day 1
NOTE: the two digits t1 and t3
01 is being set.
•
Temperature and hour selection (blinking digit) is set by pressing the
corresponding key ( , t1 t2 and ) (fig. 9).
- Press the PROG key to exit without saving any programming.
- Keys t1 t2 , and t3 can be pressed repeatedly to advance 1h forward each time or
kept pressed until the desired hour is reached, moving forward by 1h every time
the digit blinks.
66
SETTING/CHANGING
t1 comfort, t2 economy and
"Winter" operation but can be changed
"Winter" operation. It is shown on
(heating).
"Summer" operation. It is shown on
(conditioner).
and P 03 (summer) , as per their factory setting, have
t3 temperature (Absence), example in fig. 8.
keeping the
.
Monday (fig. 9).
, referring to the hour 0:00 , will blink when program
t3
t3 absence) and
(heating).
keys (or else
OK key (or
0:00
press (one of the two keys)
P
for at least 4 seconds
.
.
.
t1
t2
t3
0 2 4 6 8 10 12 14 16 18 20 22
.
.
.
t1
t2
t3
0 2 4 6 8 10 12 14 16 18 20 22
or
.
comfort
.
.
economy
Digit
absence
t1
t2
t3
0 2 4 6 8 1 0 12 14 16 18 20 22
fig. 7
fig. 8
fig. 9