Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
5 - CHRONOTHERMOSTAT PROGRAMMING
•
Once the temperature profile is set for
save and return to Monday's (1) settings, then press the OK key again for 4
seconds
(example in fig. 13);
program.
•
The display will show: the current day, the room temperature and the 24-hr
temperature range programmed with the current time digit blinking; the
chronothermostat is working.
•
Now couple the chronothermostat with the receiver see paragraph 4.8 .
5.3) HALF-HOUR (½ h) PROGRAMMING
For example,
P 02
or
P 03
setting for programming:
- from h 06:00 to h 06:30 with
t2
- from h 06:30 to h 07:00 with
t1
1°
Set temperature t2 to h 06:00
blinking digits are set an hour later (h 07:00).
2°
Press the "½ h" key to return to the previous hour setting (h 6:30), the two
digits corresponding to
t1
and
3°
Press key t1 to set temperature t1 for the second half hour, in link with h 6:00,
the two digits pertaining to
setting the subsequent hour (h 07:00) will blink.
68
Sunday 7
( ), press
OK
(example in fig. 12) to
this operation saves the complete weekly
(
(Economy) temperature
(Comfort) temperature
: press key
t2
until the two corresponding
t3
will blink.
t1
and
t2
will remain lit, whereas the two digits for
.
.
.
0
2
4
)
.
.
.
0
2
4
1°
2
4
6
3°
t1
t2
t3
6
8
10 12 14 16 18
20 22
fig. 12
t1
t2
t3
6
8
10 12 14 16 18
20 22
fig. 13
2°
t1
t2
h
t3
8
10
2
4
6
8
10
t1
t2
t3
2
4
6
8
10
t1
t2
t3
Publicité
Chapitres
Table des Matières
