Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
5 - CHRONOTHERMOSTAT PROGRAMMING
5.1/d) PROGRAMMING: HOUR-MINUTES (current)
•
After having set the day, the hour and minutes will blink on the display. Using the
select the current hour and minutes
one minute and keeping the key pressed activates the rapid
note: in case of an error, press the
Once the current hour is set press
The
P 01
program will appear on the display (slow blinking).
5.1/e) SELECTING THE WEEKLY PROGRAM
3 weekly programs are present on the chronothermostat:
P 01 factory set winter program (reprogrammable)
P 02 winter (fully programmable)
P 03 summer (fully programmable)
note: program for absence from home:
Program
P 01
with days,
times and temperatures
on the 24h scale present in
the factory.
t
1
=
Comfort
temperature
t
=
Economy
temperature
2
0
•
If pre-set program
P 01
is suitable, press
•
The display will show: the current day, the room temperature and the 24-hr
temperature range programmed with the current time digit blinking (example in fig. 6).
Note: briefly press the
Now couple the chronothermostat with the receiver see paragraph 4.8
•
If, however, you want to select another program (fig. 5), quickly press the
(or keys
) until the display shows the desired program (P02 winter or P03
summer), then press
OK
.
•
To set/change the weekly program (for the first time), proceed as described in the
following paragraph 5.2.
(pressing repeatedly increases or decreases the time by
scroll).
key to return to day setting.
OK
to confirm.
P 04
-Holiday (see paragraph 7.3).
.
.
.
t1
t2
t3
2
4
6
8
10 12 14 16 18
20 22
OK
.
key to view the current hour.
(
keys,
Every days
of the week
Times:
t
1
06,30 ÷ 22,30
00,00 ÷ 06,30
t
2
22,30 ÷ 24,00
).
PROG
key
t1
t2
t3
0
2
4
6
8
10 12 14 16 18
20 2
2
.
.
.
t1
t2
t3
0
2
4
6
8
10 12 14 16 18
20 22
.
.
.
t1
t2
t3
0
2
4
6
8
10 12 14 16 18
20 22
fig. 4
fig. 5
fig. 6
65
Publicité
Chapitres
Table des Matières
