BH LK500RiB Guide D'utilisation page 52

STEP 7
Connect all wires from the Console (G) with the wires you threaded through the control
tube. Tuck the connected wires into the Control Tube (F). Then attach the Console (G) to
the Control Tube (F) with Truss Phillips Screw (K17). Then assemble the left & right pedals
(L, K). Each pedal is labeled with an "L" and "R" for left and right, please make sure that
you are attaching the correct pedal onto the correct side.
G
52
LK500RiB v6