BH LK500RiB Guide D'utilisation page 18

STEP 5
Attach the Backrest Tube (I) onto the Rear Frame (B) with Flat End Hex Screws (K09)
and Spring Washers (K10). Then attach Seat-pad (J) and Backrest (H) onto the Backrest
Tube (I) and Rear Frame (B) with Truss Hex Screws (K11), Spring Washers (K10) and
Flat Washers (K12). Finally, attach the Backrest Decorative Cover (R) and tighten with
Screws (K22).
J
R
H
I
18
LK500RiB v6