FAR KM2727 Manuel D'utilisation page 38

ENGLISH
2. To remove an attachment, press lightly
in again and unlock by turning clockwise
slightly.
3. Remove the attachment.
4. Unlock the bowl cover by rotating it slightly
clockwise.
5. Unlock the mixing bowl by rotating slightly
counterclockwise.
6. Remove the mixing bowl.
7. Press the tilt knob and swing the top housing
down into the working position.
Note: Press the tilt knob round fully and hold
until the top housing is right down. Then swing
the tilt knob back again.
Removing the blender jug:
1. Turn the blender jug counterclockwise
until the triangle symbol aligns the triangle
symbol.
GB-20
2. Remove the blender jug.
3. Put the blender lid back on.
Using the funnel
You can add ingredients during mixing:
1. Reduce the speed to 1-2.
2. Add ingredients through the funnel.
Using the blender jug
Caution!
• Never allow the blender to run for more than
3 minutes at one time. It then has to cool
down again first to prevent the appliance
overheating.
1. Always put the liquid ingredients in the
blender jug first.
2. Chop up the solid ingredients beforehand to
stop any lumps jamming the blades.
3. Make sure you always replace the blender lid
on the blender jug before starting the blender
as the contents might otherwise be ejected.
4. If you wish to add other ingredients
during blending, turn the safety cap
counterclockwise and then take off the
blender lid.
5. Select the desired speed on the speed knob.
ENGLISH
GB-21