Troubleshooting - Tronic TLA 18 A1 Mode D'emploi

Troubleshooting

A connected device does not charge
(the operating LED 2 does not light
up white)
No connection to the vehicle socket .
♦
Check the connection .
Depending on the vehicle type, it is pos-
♦
sible that the ignition has to be switched
on first .
The operating LED 2 goes out after
a device has been connected.
The car charger adapter is overloaded
♦
and will no longer charge the connected
device . The internal overcurrent protec-
tion has been triggered . Disconnect the
connected device from the in-car charg-
er . The white operating LED 2 lights
up immediately and the in-car chargeris
ready for use again .
TLA 18 A1
GB │ IE │ NI │
19 ■