Tronic TLA 18 A1 Mode D'emploi page 20

Insert the car charger adapter into the
♦
12/24 V connection of your car . This
is usually the vehicle socket (cigarette
lighter) on the dashboard of your vehicle .
Many vehicles have a second socket
by the rear seats or in the boot . 24 volt
batteries are often used in lorries or on
boats .
The operating LED 2 lights up white to
♦
signal that the in-car charger is being
supplied with power . The operating LED 2
also lights up if no device is
connected . Depending on the vehicle
type, it is possible that the ignition has
to be switched on first .
Connect your device to the car charger
♦
adapter . Use the original USB cable
supplied with your device to optimise
the charging process .
If required, you can switch your connected
♦
device on for further use .
TLA 18 A1
GB │ IE │ NI │
17 ■