Troubleshooting - Tronic TPB 5000 A1 Mode D'emploi

Troubleshooting

The power bank does not charge.
♦ The connection may be faulty. Check the connection.
A connected device does not charge.
♦ The integrated battery is empty. Charge the battery.
♦ No connection to the device. Check the connection.
♦ Press the ON/OFF button 2 once briefly to start the
charging process.
♦ The charging current of the connected device is too
low or too high.
♦ The internal overcurrent protection may have been
triggered. Disconnect the connected device and brief-
ly connect the USB-C charging port 4 to a power
source (see section Charging the power bank).
Afterwards, the power bank can be used again.
TPB 5000 A1
GB │ IE │ 15 ■