Comelit 20090334 Manuel Technique page 14

Icons menu
This menu can be used to select the icons you wish to display in the remotely controlled user menu.
The relevant category (lights, loads, etc.) can be selected in line with the type of output to be added.
• Light
• Load
• Automation
14
Icon type: Type of function you wish to add/modify.
Icon number: The position occupied by the icon within the menu for the associated function.
Light: Normal light with ON/OFF function.
Dimmer: Dimmer light. The light can only be controlled in an ON/OFF manner (with no adjustment) from
the web page.
RGB: Multicoloured light with the option of adjusting the intensity and tone, if the light bulb is compatible.
Timed: Timed light.
Icon description: Description which will appear underneath the icon within the associated function.
Module number: Number of the SimpleHome module you want to control.
Output number: Number of the output on the SimpleHome module you want to control (activated
previously).
Icon type: Type of function you wish to add/modify.
Icon number: The position occupied by the icon within the menu for the associated function.
Normal: Normal load.
Timed: Timed load.
Icon description: Description which will appear underneath the icon within the associated function.
Module number: Number of the SimpleHome module you want to control.
Output number: Number of the output on the SimpleHome module you want to control (activated
previously).
Icon type: Type of function you wish to add/modify.
Icon number: The position occupied by the icon within the menu for the associated function.
Automatism: General automation with single ON/OFF output.
Shutter: Shutter with the option of controlling opening / closing movement.
Timed: Timed automation with 1 output.
Icon description: Description which will appear underneath the icon within the associated function.
Module number: Number of the SimpleHome module you want to control.
Output number: Number of the output on the SimpleHome module you want to control (activated
previously). If you select the "Shutter" function, only activate the fi rst of the 2 outputs.