Comelit 20090334 Manuel Technique page 12

Accessing the device for the fi rst time
The factory setting for the device IP address is 192.168.1.252.
√ Your PC must therefore be confi gured with an IP which is part of the subnetwork, i.e. with an address between 192.168.1.0 and
192.168.1.255.
To access the device:
1. Open your browser.
2. Enter the address http://192.168.1.252 in the web address bar.
3. Press enter.
» The main page will appear, showing 2 menus:
• HOME: menu dedicated to system operation. User name: user - Password: 1234.
• SETUP: menu dedicated to system settings. User name: admin - Password: 4321.
Reset
To reset the IP address to the factory-set value:
1. Press and hold the Reset button for 5 seconds, until you hear a beep.
The device will automatically restart with factory-set address 192.168.1.252 restored.
To restore the factory settings on the device:
1. Press and hold the Reset button for 15 seconds, until the beep stops.
The device will automatically restart with the factory settings restored.
CAUTION!! When the reset procedure is carried out, all system configurations memorised previously will be deleted.
Accessing the installer setup menu
Once you have entered the setup menu:
1. Click on "installer setup".
2. Enter the user name "admin".
3. Enter the password "4321".
12