MRA 4025066155316 Instructions De Montage page 3

GB
Read this manual carefully and check the parts list for completeness before you begin. We recommend
Number
1 MRA screen
1 Brackets, 1 pair
4 Oval head screws, M5 x 16 mm
4 Plastic washers
4 Rubber nuts, M5
2 Allen screws, M8 x 40 mm
2 Washers, black
2 Spacers, black, 10 mm
How to mount the screen on your motorbike:
1. Stand your motorbike up on a level surface.
2. Unscrew the upper screws on the triple clamp.
3. Insert the M8 x 40mm Allen screw with the black washers and 10 mm spacers through the
hole on the bracket, and place the 10 mm spacer onto it from the other side (P1).
4. Place the rubber nuts into the brackets (P2).
5. Mount the brackets onto the triple clamp, line up the brackets evenly, and carefully torque
the 8 mm Allen screw up to 19 Nm (P2 + P3).
6. Insert the M5 x 16 mm Allen screws with the black washers through your MRA screen.
7. Position the MRA screen and tighten the Allen screws.
After installation, check that all of the screws are tight; tighten them up if necessary. Repeat this at
regular intervals. Clean the screen with water, neutral soap and a sponge. Do not use solvents, alcohol or
MRA-Klement GmbH Siemensstr. 6 D-79331 Teningen Tel.: +49 7663 93890 Email: info@mra.de
Thank you for buying a MRA Windshield.
that you have your screen fitted by an authorised workshop.
Article
spirits to clean the screen as they will damage it.
MO UN T IN G IN STR UC T ION S
BMW R nineT 2014-
Article No..
--- Allen key, 3 mm
11110 Allen key socket driver, 6 mm
Torx TX 45 socket driver
10554
Torque wrench
10635
10629
11108
11036
10776
3
Required tools