Panasonic WX-CC411 Mode D'emploi page 43

Pop-up messages
Category
Warning
No headset is registered.
Unable to set the password. Please check the
following:
- The "Old Password" has been entered correctly.
- The "New Password" and "Old Password" are
not the same.
- The same passwords have been entered for
"New Password" and "Confirm New Password".
An error has been found.
Please check settings again.
Message playback has failed.
Please try again later.
Message recording has failed.
Please try again later.
Processing has not been executed.
Please try again later.
Not enough free space on SD memory card.
Process aborted.
Error
Data error on SD memory card.
Process aborted.
The system failed to read the data from SD
memory card.
The system failed to write the data on SD
memory card.
SD memory card format error.
Fatal error has occurred on ***.
The system failed to read the Flash memory
device.
The system failed to write to the Flash memory
device.
E-mail delivery failure.
Please confirm network connection and E-mail
settings.
Wording
43
Cause/solution
Displayed when you perform group setting or deletion
of an All-In-One Headset or Belt Pack when no All-In-
One Headset or Belt Pack is registered.
Displayed when a password change fails. Check the
following and change the password again.
• Is the current password correct?
• Are the current and new passwords different?
• Does the new password input for confirmation
match the new password you input first?
Displayed when the [Set] button is touched on the
setting screen when there is an error in the setting.
Check the setting contents for an error.
Displayed when confirmation playback of a message
fails. Wait a moment, then perform playback
operation again.
Displayed when recording of a message fails. Wait a
moment, then perform recording operation again.
Displayed when processing being performed fails.
Wait a moment, then perform the same operation
again.
Displayed when the free space on the SD card
is insufficient for the data you are trying to save.
Increase the free space of the SD card using a
personal computer or format the SD card, then try
again.
Displayed when you try to read data from the SD
card and there is an error in the data. Data read
processing is interrupted.
Displayed when reading data from the SD card fails.
Displayed when writing data to the SD card fails.
Displayed when the SD card is formatted incorrectly.
Format using this unit.
Displayed when a problem occurs in *** (device). If
this is still displayed after restarting the system, call
the store where you purchased this unit.
Displayed when reading data from the internal
memory fails. If this is still displayed after restarting
the system, call the store where you purchased this
unit.
Displayed when writing data to the internal memory
fails. If this is still displayed after restarting the
system, call the store where you purchased this unit.
Displayed when email sending fails because the
network is not connected or the email settings are
not set.