Panasonic WX-CC411 Mode D'emploi page 16

Masquer les pouces Voir aussi pour WX-CC411:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Setting the Center Module
How to delete an ID
This function is used to cancel the ID registration of All-In-
One Headsets or Belt Packs.
1
Turn off the All-In-One Headset or Belt Pack to
be deleted.
2
On the Settings screen, touch the [Headsets]
button, and then the [ID Deletion] button.
w p All of the All-In-One Headsets or Belt Packs with
registered IDs are displayed in a list.
* If there is no All-In-One Headset or Belt Pack with
registered IDs, this screen is not displayed.
3
On the ID Deletion screen, touch the [Deletion]
button of the All-In-One Headset or Belt Pack
to be deleted.
w p The following confirmation pop-up screen is
displayed. To delete, touch the [YES] button. To
cancel deletion, touch the [NO] button.
Note
w p You can check your Headset number by turning it on
and listening to the voice prompt. When an All-In-One
Headset or Belt Pack is turned on, the following voice
prompts will be heard: "Hello", "Headset xx" (xx is the
ID number registered in the Center Module), "Lane x"
(x is the connected lane).
How to register groups
Register a group of All-In-One Headsets or Belt Packs.
If you select a group as the broadcast destination for alert
messages or reminder messages, you can broadcast to
multiple All-In-One Headsets or Belt Packs simultaneously.
1
On the Settings screen, touch the [Headsets]
button, and then the [Group] button.
Note
w p You can set from Group 1 to Group 6.
2
Touch the button of the group to be set.
w p All of the All-In-One Headsets or Belt Packs with
registered IDs are displayed in a list.
* If there is no All-In-One Headset or Belt Pack with
registered IDs, this screen is not displayed.
3
Select the All-In-One Headsets or Belt Packs
that will be registered in a group.
w p Set the All-In-One Headsets or Belt Packs to be
registered in a group to [ON].
w p Set the All-In-One Headsets or Belt Packs to be
deleted from a group to [OFF].
w p When deleting all All-In-One Headsets or Belt Packs
from a group, touch the [Clear] button.
Default setting: All OFF
w p If you touch the [Clear] button, the following
confirmation pop-up screen is displayed. To delete
from the group, touch the [YES] button. To cancel
deletion, touch the [NO] button.
16

Publicité

Chapitres

Table des Matières
loading

Ce manuel est également adapté pour:

Wx-cc412

Table des Matières