Pop-Up Messages - Panasonic WX-CC411 Mode D'emploi

Pop-up messages

The following are typical pop-up messages displayed on the LCD display and the causes and remedies for them.
Category
SD card was read successfully.
Password was changed successfully.
Confirmation
Mail transmission process accepted.
Recording was stopped because the "PAGE"
function has not been activated for a certain
time.
Authentication failed. Please reconfirm your
password.
Settings have not been saved.
Continue without saving?
No SD memory card is inserted.
The system failed to find the data on SD
memory card.
SD memory card is write-protected.
SD memory card was removed.
Date & time is not correct.
Warning
Please set current date & time.
Security alert has occurred.
Process was terminated.
Processes are terminated during security alerts.
The message playback was stopped for the
following reason:
Alert
V/Det: ON
TALK
PAGE
Message playback cannot be performed under
the following conditions.
Alert
V/Det: ON
TALK
PAGE
Wording
42
Cause/solution
Displayed when an inserted SD card is read
normally.
Displayed when the password is changed normally.
Displayed when mail sending processing performed
on the Help Contact screen is accepted.
Displayed when PAGE is not started within a certain
time in message recording mode. Perform recording
operation again.
Displayed when password confirmation fails. Input
the correct password.
Displayed when the return button is touched without
entering a setting change or inputting contents
(without touching the [Set] button or [Enter] button).
When exiting the screen without entering, touch the
[YES] button. When returning to the previous screen,
touch the [NO] button.
Displayed when you try to access an SD card when
no SD card is inserted. Insert an SD card and try
again.
Displayed when you try to read data from an SD card
but there is no data.
Displayed when you insert an SD card or try to write
data to it, but the SD card is set to LOCK (write
prohibition). Cancel LOCK for the SD card, then use
that card.
Displayed when the SD card is removed.
Displayed when the current date and time are not set.
Set the current date and time in the setting menu.
Displayed when a security alert occurs while a
message is being recorded or played back. At this
time, recording or playback is interrupted.
Displayed when you record or play back and confirm
a message while a security alert is occurring. These
operations are not accepted while a security alert is
occurring.
Displayed when confirmation playback is interrupted
by security alert, vehicle detector input, TALK, or
PAGE on lane A.
Displayed when you perform playback confirmation
while a security alert, vehicle detector input, TALK or
PAGE is occurring. Under this condition, you cannot
perform confirmation playback.