Setting The Greeter Message - Panasonic WX-CC411 Mode D'emploi

Setting the messages [Message]
w Setting the greeter message
w
This function provides a voice message to "greet" each
customer. When the vehicle detector detects a vehicle, the
greeter message is automatically output from the order post.
Note
w p The settings related to the greeter message are
common to lanes A and B. If the settings are changed,
they are applied to both lanes.
Setting the overall greeter message
This function is used to set the overall greeter message.
1
On the Settings screen, touch the [Message]
button, [Greeter Message] button, and then the
[Common] button.
[ON/OFF]
Set whether to use the greeter message.
OFF: The greeter message is not played back.
ON:
The greeter message is played back.
Default setting: ON
[Volume]
Set the volume of the greeter message.
You can set the volume from 0 to 20.
Default setting: 11
[Delay Time]
Set the delay time after the vehicle detector detects a
vehicle until the greeter message is played back.
You can set the delay time from 0 to 10 seconds in
increments of 1 second.
Default setting: 0 s
[Destination]
When playing back the greeter message, a broadcast
destination except the order post speaker is selected.
w p [All Headsets]
OFF: The greeter message is not broadcast to any
All-In-One Headset or Belt Pack.
ON: The greeter message is broadcast to all All-In-
One Headsets or Belt Packs.
Default setting: OFF
w p [AUX Speaker]
OFF: The greeter message is not broadcast to the
kitchen speaker.
ON:
The greeter message is broadcast to the
kitchen speaker.
Default setting: OFF
Note
w p If the setting is ON, the greeter message is broadcast
to both the All-In-One Headsets or Belt Packs for the
lane in which a vehicle is detected and to the kitchen
speaker.
30