Setting The Alert Message - Panasonic WX-CC411 Mode D'emploi

Setting the messages [Message]
w Setting the alert message
w
Set the alert message to notify store personnel when a
security alert occurs.
For operations to be performed when a security alert occurs,
refer to "Setting the security alert [Security Alert]" (p.36).
Setting the overall alert message
This function is used to set the overall alert message.
1
On the Settings screen, touch the [Message]
button, [Alert Message] button, and then the
[Common] button.
[ON/OFF]
Set whether to use the alert message.
OFF: The alert message is not played back.
ON:
The alert message is played back.
Default setting: ON
[Volume]
Set the volume of the alert message.
You can set the volume from 0 to 20.
Default setting: 11
[Delay Time]
Set the delay time after the occurrence of an
alert until the alert message is played back.
You can set the delay time from 0 to 10 seconds in
increments of 1 second.
Default setting: 0 s
Setting individual alert message
This function is used to set individual alert message.
You can use up to 30 alert messages.
1
On the Settings screen, touch the [Message]
button, [Alert Message] button, and then the
[Message] button.
2
Touch the button of the message number that
you will set from the message list.
3
Set the alert message.
[Message Name]
Touch the [Edit] button and edit the message name. (Up
to 18 alphanumeric characters and symbols)
Default setting: Alert nn (nn: Message number 01 to 30)
[Destination]
Set the broadcast destinations for the alert message.
w p [Group]
Touch the [Select] button, and then select an All-
In-One Headset or Belt Pack as the broadcast
destination.
All Headsets:
Group number:
Default setting: All Headsets
Note
w p Select group number 1 to 6. You can select multiple
groups.
w p [AUX Speaker]
Set whether to output the alert message to the
kitchen speaker.
OFF: The alert message is not output to the kitchen
speaker.
ON:
The alert message is output to the kitchen
speaker.
Default setting: ON
4
Touch the [Set] button.
w p The setting of the alert message is entered.
35
The alert message is broadcast
to all All-In-One Headsets or Belt
Packs.
The alert message is broadcast
to the All-In-One Headsets
or Belt Packs in the selected
group(s).