Setting Each Lane [Lane]; Setting The Volume Of Input Sound; Setting The Volume Of Output Sound - Panasonic WX-CC411 Mode D'emploi

Setting each lane [Lane]

This function is used to set the sound volume of the speaker
and microphone. It is also used to set noise reduction and
echo cancellation.
w Setting the volume of input
w
sound
This function is used to adjust the volume of the voice to
be output to the All-In-One Headsets or Belt Packs or order
post speakers.
1
On the Settings screen, touch the [Lane]
button, ([Lane A/B] button,)* and then the
[Input Volume] button.
* This appears only when the WX-CC412 is used.
2
Adjust the sound volume for each input.
You can set the volume from 0 to 20.
[Outside Mic]
Set the volume of the order post microphone.
Default setting: 11
[AUX Mic]
Set the volume of the kitchen microphone.
This volume is also applied when the voice of the
kitchen microphone is output to the kitchen speaker.
Default setting: 11
[Line In]
Set the volume of the line input.
Default setting: 11
[Beep]
Set the volume of the beep tone.
Default setting: 11
w Setting the volume of output
w
sound
This function is used to adjust the sound volume of each
output.
1
On the Settings screen, touch the [Lane]
button, ([Lane A/B] button,)* and then the
[Output Volume] button.
* This appears only when the WX-CC412 is used.
2
Adjust the sound volume for each output.
You can set the volume from 0 to 20.
[Outside Speaker]
Set the volume for the order post speaker.
Default setting: 11
Note
w p When the ASLC function is ON, a sound louder
than the set value may be output from the speakers,
depending on the noise environment around the order
post. For details on the ASLC, refer to "Setting the
DSP" (p.26).
[AUX Speaker]
Set the volume of the kitchen speaker.
Default setting:11
[Line Out]
Set the volume of the line output.
Default setting:11
24