Before Use; Preface; Features; System Diagram - Panasonic WX-CC411 Mode D'emploi

Before use

w Preface
w
The WX-CC411 and WX-CC412 are Center Modules for the wireless intercom systems that are used in drive-thru outlets.
w Features
w
w p The WX-CC411 is designed for single lane operation of drive-thru outlets; the WX-CC412 is designed for dual lane operation.
w p A system compliant with the 1.9 GHz band DECT
heard clearly and distinctly even in open areas, and interference is minimal, resulting in stable communication.
* Digital Enhanced Cordless Telecommunications
w p A high degree of vocal clarity is ensured by a powerful echo canceller and digital noise reduction (Digital Noise Reduction).
w p The cabinet supports wall-mounting for easy installation.
w p The total number of All-In-One Headsets and Belt Packs that can be registered is 32. Up to four operators can communicate
at the same time per lane using All-In-One Headsets and Belt Packs.
w p This unit has a 7-Type LCD display with a touch panel, and is easy to operate.
w p This unit can be connected to an IP network using Ethernet to enable remote control operations to be performed.
w p Using an SD card, it is possible to back up and restore the settings, and save messages unique to the outlet.
w p The system contains a scheduler to enable the greeter message to be changed at designated times and reminder messages
to be played back automatically.
w p Up to four Network Cameras made by Panasonic can be registered, and their images can be monitored on this unit's LCD
display.
w p Alert signals that have been received can be sent to the All-In-One Headsets or Belt Packs, signals can be output to external
devices, and alert emails can be sent to external destinations.
w System diagram
w
By connecting the Center Module and All-In-One Headsets or Belt Packs wirelessly, it is possible to communicate between the
All-In-One Headsets or Belt Packs or between the All-In-One Headsets or Belt Packs and the customers at the order post.
All-In-One Headset
WX-CH450
PAGE
(Communications with
other store personnel)
Belt Pack
WX-CT420
* standard is used so the voices of the store personnel and customers are
Center Module
WX-CC411/WX-CC412
Belt Pack
WX-CT420
3
Order post
Microphone
Speaker
TALK
(Communications with
customers)
All-In-One Headset
WX-CH450
Vehicle detector
Note
w p Connect the vehicle
detector to terminals
CNT1 and COM of vehicle
detector input [VDET].
If the vehicle detector is
connected to terminal
CNT2, it will not work,
since this terminal is for
expansion (unused).