Using An Sd Card [Sd Memory Card] - Panasonic WX-CC411 Mode D'emploi

Using an SD card [SD Memory Card]

You can back up current settings and messages on an
SD card. You can also restore the backup settings and
messages.
Important
w p While the SD card access LED is blinking, do not
eject the SD card, disconnect the power plug or press
the reset button. Performing any of these actions may
destroy the data on the card.
w w Back up the settings data and
messages
This function backs up the current settings and messages
on an SD card.
1
On the Settings screen, touch the [SD Memory
Card] button, and then the [Back Up] button.
2
Touch the [Execute] button.
w p The following confirmation pop-up screen is
displayed. To continue backing up, touch the [OK]
button. To cancel backing up, touch the [Cancel]
button.
w p Touch the [OK] button to start backing up.
When backing up is completed normally, the
completion pop-up screen is displayed.
w p A folder with the title [Data Name] is created in the
BACKUP folder of the SD card and the backup data
is saved in it.
Note
w p For the composition of the folders on the SD card,
refer to "Composition of folders on SD card" (p.40).
38