SOMFY S&SO-RS100 io Notice page 31

For a roller shutter with
rigid links and with stops =
Plug&Play Operation
No setting to be performed:
the end limits are
automatically.
Check that the roller
shutter and its accessories
are robustly fixed.
Please consult the roller
shutter manufacturer or
Somfy for information on
the compatibility of the
drive with the roller shutter
and its accessories.
The rotation direction of the drive self-adjusts automatically during the first few
cycles. During the first few movements, the
automatically without the need for any settings, a er maximum 2 complete cycles, from stop
to stop). For a roller shutter less than 0.5 m² in area (0.6 m x 0.7 m), see Questions
on S&SO-RS100 io? section.
Copyright © 2014 - 2016 Somfy SAS. All rights reserved.
Step 1: Preprogramming the control point
For a roller shutter
without rigid links and
without stops
The upper and lower end limits
set must be set in manual mode.
Step 2
Setting / resetting
of end limits in manual
mode
Step 3: Programming the control point
OPERATION
without rigid links and
with stops or with rigid
links and without stops
The upper and lower end limits
must be set in semi-automatic
mode.
a
:
semi-automatic mode
Λ/V
orders may be inverted (they adjust
Non contractual images.
EN
For a roller shutter
b
Step 2 :
Setting / resetting
of end limits in
29