Maintenance and cleaning
WARNING! RISK OF INJURY! Disconnect the appli-
ance from the compressed air supply.
CAUTION!
►
Before maintenance, clean off any hazardous substances that
may (due to working processes) have accumulated on the ap-
pliance. Avoid all skin contact with these substances. If the skin
comes into contact with hazardous dusts, this can lead to severe
dermatitis.
►
The dust and vapours produced by using the appliance can be
hazardous to health (e.g. cause cancer, birth defects, asthma
and/or dermatitis); it is essential to carry out a risk assessment in
respect of these risks and to implement corresponding regulatory
mechanisms.
NOTE
To ensure correct functioning and long-term durability of the rivet
gun, pay attention to the following points:
■
Sufficient and continuously intact oil lubrication is highly important
for optimum functioning.
■
Use only the genuine replacement parts recommended by the
manufacturer, otherwise you could put users at danger. In doubt,
contact the Service Centre.
■
Use only accessories and supplies of the sizes and types recom-
mended by the manufacturer of the rivet gun.
■
Only clean the appliance with a soft, dry cloth or with compressed
air.
■
Never use sharp or scratchy cleaning agents under any circum-
stances.
PDBNP 14 A1
GB │ IE
│
39
■