Risks Due To Repetitive Movements; Hazards Caused By Accessories; Hazards In The Workplace - Parkside PDBNP 14 A1 Traduction Des Instructions D'origine

■ Use breathing equipment as per the instructions provided by your
employer or as required by health and safety regulations.

Risks due to repetitive movements

■ When using a rivet gun, the operator should adopt a comfortable
posture whilst ensuring a secure hold and avoiding awkward
postures or positions in which it is difficult to maintain balance. The
operator should change positions during the course of long-last-
ing tasks. This can be helpful in the prevention of discomfort and
fatigue.
■ Users of non-rotary, percussive tools may experience unpleasant
sensations in their hands, arms, shoulders, neck area or other body
parts while working with the tools.
■ If the operator notices symptoms such as persistent or recurring
illness, discomfort, throbbing, pain, tingling, burning or stiffness,
these indications should not be ignored. In this case, the operator
should consult a suitably qualified physician.

Hazards caused by accessories

■ Before replacing the mouthpiece
disconnect the rivet gun from the compressed-air supply.

Hazards in the workplace

■
Slipping, tripping up and falling are the main causes of injuries
at the workplace. Take care not to trip over the air hose.
■ This pop rivet gun is not suitable for use in explosive environments
and is not insulated against contact with power sources.
■ Do not operate the appliance in the vicinity of electric mains,
gas pipelines etc. which could pose a hazard if damaged by the
machine.
│ GB │ IE
■ 32
or emptying the pin collector
PDBNP 14 A1
,