Tips And Tricks; Maintenance And Cleaning - Parkside PMGS 12 C3 Instructions D'utilisation Et Consignes De Sécurité

Examples of appropriate tool selection Function:
Function Accessory
Drilling HSS drill
Milling bits
Milling
Engraving Engraving
bits
Metal brush
Polishing, derusting
Polishing wheel
CAuTION!
14
Use only the lightest
contact pressure of
the tool on the
workpiece.
Cleaning Plastic brush
Grinding Grinding
wheels
Grinding bits
Cutting and sawing Cutting discs
Be sure not to exceed the maximum diameter of
composite abrasive wheels and grinding cones
and cylinders with 55 mm thread insert, and
the 80 mm maximum diameter of sandpaper
grinding accessories.
Note: The max. permissible mandrel length is
33 mm.
Store accessories inside the original box or oth-
erwise protect the accessories from damage.
Store accessories dry and away from aggres-
sive media.

Tips and tricks

Applying excessive pressure can cause the in-
stalled tool to break and / or damage the work
piece. Optimal results can be achieved by ap-
All manuals and user guides at all-guides.com
Application
Drilling wood
12
Various tasks, e.g. hollowing out, goug-
20
ing, shaping, grooving or slotting
Making marks, craft projects
(see Fig. D)
21
Derusting
16
Working on various metals and plastics,
in particular noble metals like gold or
silver (see Fig. E)
E.g. cleaning complex plastic housings
19
or the area around a door lock
Grinding work on stone, wood; fine
work on hard materials such as ceramic
15
or alloyed steel (see Figs. F, G)
22
Cutting metal,
17
plastic or wood
Operation / Maintenance and cleaning
plying the tool to the work piece at a steady
speed range and little pressure.
Hold the device with both hands whilst cutting.
Please note the data and information in the
chart to prevent the spindle end touching the
perforated plate of the grinding tool.

Maintenance and cleaning

Q
The device is maintenance-free.
C lean all the dirt off the drill / grinder. Use a
dry cloth for cleaning.
Projection
(min–max) mm
18–25 when us-
ing the smallest
drill the projection
is 10 mm
18–25
18–25
9–15
12–18
9–15
12–18
10
12–18
GB/IE 15