Introduction; Scanner Overview - Kodak P461 Guide De L'utilisateur

I n t r o d u c t i o n
Now you can scan your printed photos, negative films, and slides, and store them on your memory card. No computer is
necessary. Simply insert a memory card into the scanner, and power it on. When the unit is ready, feed your printed photo,
negative filmstrip, or slide into the scanner and your pictures are stored in the memory card. It's as easy as that.
If you want to transfer your photos directly into your PC, it's just as easy via a USB cable and our Scan PC Software (page 15).
S c a n n e r O v e r v i e w
Front View
No. Name

Power Button

Power Indicator

Status/Card Indicator
 Transparency feed
slot

Paper guide lever

Photo Feed Slot

Orientation guide

Power connector

Mini USB connector
4 Customer Support: http://www.pandigital.net/kodaksupport
Function/ Description
Press once to turn on in 600dpi mode (default); press again for 300dpi mode.
Press and hold for 1 second to turn off.
If an original jams in the feeding slot (
photo/slide scanning mode, and feed forward in filmstrip scanning mode.
Indicates the power status of the scanner. (Refer to "Indicator Lights" on page 5.)
Indicates the operating status of the scanner and memory card. (Refer to "Indicator Lights"
on page 5.)
For scanning transparencies like 35mm filmstrips and 35mm slides – requires 35mm
filmstrip guide adapter or 35mm slide holder
Slide the guide to adjust for smaller originals to ensure the proper alignment.
For scanning non-transparent originals like photos and business cards.
Indicates the correct position and orientation of the original for proper scanning.
For connecting to the 35mm supplied power adapter.
For connecting to a computer via a USB cable.
 
and ), press to back it out of the scanner in