35mm negative/monochrome filmstrips are unsuitable with any of the following conditions:
S u p p o r t e d M e m o r y C a r d s
MS (Memory Stick)
MS Pro
MS Pro Duo (adapter required)
MS Duo
MMC (Multi Media Card)
RS-MMC (adapter required)
1. Ends of the filmstrip are taped. Remove the tape and clean any residue of glue before scanning.
2. Ends of the filmstrip have not been cut straight across. Cut the ends straight across before
scanning.
3. Ends of the filmstrip are folded. Cut the folded portions before scanning.
4. Ends of the filmstrip are tapered. Cut the ends straight across before scanning.
5. Some perforations on the filmstrip are torn or missing. This may affect the scanner's auto
feeding mechanism. Gently push the filmstrip into the filmstrip guide adapter when necessary.
xD (extreme Digital, H-type and M-type)
SD (Secure Digital)
SDHC
MINISD (adapter required)
MICROSD/T-Flash (adapter required)
MICROSD Card (SD adapter required)
Customer Support: http://www.pandigital.net/kodaksupport
7