Technical Data And Installation; Technical Data; Transportation; Setting Up - CombiSteel 7054 Série Mode D'emploi

TECHNICAL DATA AND INSTALLATION

TECHNICAL DATA

MODEL MOTOR (Watt)
7054.0070 1,1 kw – 1,5hp
7054.0075 1,1 kw – 1,5 hp

TRANSPORTATION

Transport the appliance by forklift or pallet. İf you don`t have such opportunity do not move the appliance alone.
The gravity center of the appliance is located in the middle of the housing. Pay attention to this point when
transporting.

SETTING UP


Set the appliance on the level ground.

Make sure the appliance is stable when operating.

Make sure the appliance is installed by qualified personnel.

POWER SUPPLY


Make sure power supply connection is carried by qualified personnel.

Make sure that the voltage of your power supply system suits appliance's electrical system.
Check the direction of rotation of the saw. The direction of rotation is the same as
showed on the label. İf it rotates in the opposite direction switch two-phased cable.
VOLTAGE (Volt) FREQUENCY (Hz)
230 50-60
400 50-60
The appliance is grounded by yellow/green cable.
www.combisteel.com
DIMENSIONS (mm) WEIGHT (kg)
510x60x915
510x60x915
55
55
6