Transport, Packaging And Storage; Delivery Check; Packaging; Storage - CombiSteel 7077.0005 Mode D'emploi

3. TRANSPORT, PACKAGING AND STORAGE

3.1 Delivery check

Please check the delivery upon completeness and transport damage immediately after receipt. In case of visible
damage do not accept or accept the delivery with reservation only.
Note the extent of damage on the carrier's bill of delivery. Trigger off the complaint.
Hidden damages should be reclaimed immediately after notice, as claims for damages can only be asserted
within the effective period for complaints.

3.2 Packaging

Please do not throw away the covering carton of your device as it might be useful for storage purposes, when
moving or, in case of damages, when the device must be sent back to a repair center. The outer and inner packing
material should be removed completely from the device before installation.
NOTE!
If you would like to dispose the packing, consider the regulations applicable in your country. Supply
re-usable packing materials to the recycling. Please inspect the device upon completeness. In case
any part is missing please contact our customer service center immediately.

3.3 Storage

Keep the package closed until installation and under consideration of the outside indicated positioning- and
storage markings. Packages should be stored under consideration of the following:
• Do not store outdoors.
• Keep it dry and dust-free.
• Do not expose it to aggressive media.
• Do not expose it to direct sunlight.
• Avoid mechanical shocks and vibration.
• In case of longer storage (>3 months) make sure you check the state of the packaging and the parts
regularly.
• If required refresh or renew.

4. TECHNICAL DATA

4.1 Technical specifications

MODEL
WIDHT
CAPACITY
ENGINE POWER
VOLTAGE
FREQUENCY
COOLING CAPACITY
WORKING TEMPERATURE
COOLING GAS
Tray Slider Shelf
7077.0005
1200mm
3x 1/1GN
1/5 HP
389W 0/+10°C
www.combisteel.com
7077.0010
1550mm
4x 1/1GN
1/4 HP
220V
50Hz
507W 0/+10°C
0/+10°C
R290
7077.0015
2200mm
6x 1/1GN
1/4 HP
507W 0/+10°C
6