Publicité
Les langues disponibles
Les langues disponibles
Introduction
To enjoy your new appliance as long as possible, please
read carefully the Operating Instructions and the attached
safety instructions before putting the appliance into
operation. We also recommend keeping the Operating
Instructions for future reference.
Making technical changes to improve the appliance as
part of the continuous product development reserved.
Translation of original operating instructions
Supply includes
Take the appliance out of the transport container and check
whether there are the following parts:
Rounded handle
Feed auger
2 wing bolts
2 bolts with nuts
Operating Instructions and warranty certificate
If any parts are missing or are damaged, please contact
your dealer.
Appliance description
Snow is pushed out to the right when being moved by the
feed auger so applying much force is not needed.
Pic. A
1.
Handle
2.
Wing bolts
3.
Bolts with nuts
4.
Feed auger
Technical specifications
GHSF 570 hand snow plough
Operating width:
Feed auger Ø:
Assembly dimensions L x W x H:
Weight:
General safety instructions
The Operating Instructions must be read
thoroughly before using the appliance for the first time.
If there are any doubts regarding the appliance
connection and operation, please contact the
manufacturer (service department).
FOLLOW CAREFULLY THESE INSTRUCTIONS TO
PROVIDE A HIGH LEVEL OF SAFETY:
The manufacturer will not be liable for any unauthorised
changes to the appliance and injury to persons and material
damage caused as a result of such changes.
CAUTION!
Make sure the appliance is stored in a safe way. An
appliance that is not used must be kept in a dry place.
Watch out for any damaged parts. Check the
appliance before using it. Are any parts damaged?
Consider seriously whether the appliance can work
perfectly and safely if slightly damaged.
Caution! Using accessory equipment and extensions
not explicitly recommended in these Operating
Instructions may result in putting persons and objects
at risk.
#94561:
570 mm
180 mm
600x250x1,125 mm
3.9 kg
5
Use as designated
The hand snow plough has exclusively been designed to
remove snow from pavements, entrances and small to
medium-sized yards.
Any other use will be considered a use in conflict with the
designation. The manufacturer will not be liable for any
consequential damage and injury. Please be sure to know
that our appliances have not been designed for industrial
purposes.
Assembly (pic. A)
1.
To connect the upper and bottom part of the handle,
insert the wing bolts (pic. A/2) in the appropriate holes.
2.
Now insert the handle in the holes on the plough and
connect it with 2 bolts and nuts (pic. A/3) included in
the supply.
3.
The hand snow plough is now ready to be operated.
Preparation and storing
Before storing the appliance, clean it properly.
Keep the appliance in a clean and dry place.
Marking:
Commands:
General command sign
Environment protection:
Dispose waste professionally
so as not to harm the
environment
Package:
Protect against moisture
Caution - fragile
Technical specifications:
Ø
Feed auger Ø
Weight
Read the Operating
Instructions before using
the appliance
Packing cardboard material
may be delivered to
collecting centres for
recycling
This side up
Interseroh-Recycling
Operating width
Publicité
