Fault Rectification; Spare Parts - Maico ECA 11 E Instructions De Montage Et Mode D'emploi

11. Fault rectification

● Call on the services of a trained electrician
any time there is a fault.
● Repairs should only be carried out by a
trained electrician.
Danger to life. Unit is powered
up.
 Switch the mains fuse off.
DANGER
Fault Cause, Measure
Fan doesn't No mains voltage.
switch on.
 Check whether the main
power fuse has tripped.
Switch it back on if
necessary.
Impeller is blocked.
Fan doesn't
switch on.
 Check that the impeller can
turn. Clean it if necessary.
Thermal ● Motor too hot.
overload
● Put the on/off switch to
protection of
the "off" position.
the motor
● Wait until the motor and
switches the
temperature limiter have
fan off.
cooled down. Cool-down
time can be up to 10 mi-
nutes, depending on the
size of the motor and the
temperature ratio.
● Put the on/off switch to
the "on" position.
● If the fault persists, call
on the services of a
trained electrician.
Tab.1: Fault rectification

12. Spare parts

Orders for spare parts: Always state
i
the print no. 0185.0897.0006 of
these instructions, the production date
(stamp on housing) and the relevant
item number from chapter 3.1.
13. Dismantling
Danger to life from electric
shock
 Switch the mains fuse off.
DANGER
● Dismantling should only be carried out by a
trained electrician.
14. Disposal
Do not dispose of in domestic
i
waste
The unit contains in part material that
can be recycled and in part substan-
ces that should not end up as
domestic waste.
 Dispose of the unit once it has reached
the end of its working life according to the
regulations valid where you are.
GB
11