Fault Rectification; Spare Parts - Maico ECA 15/2 E Instructions De Montage Et Mode D'emploi

10. Fault rectification

● Call on the services of a trained electrician
any time there is a fault.
● Repairs should only be carried out by a
trained electrician.
Danger to life. Unit is powered
up.
 Switch the mains fuse off.
DANGER
Fault
Unit doesn't run
Thermal overload
protection of the
motor switches unit
off.
Tab.1: Fault rectification
Countermeasure
Check that the mains
fuse is switched on.
Move On/Off switch
into "Off" position.
Before starting back up
again, switch off fan
until the motor and
temperature limiter
have cooled down.
It may take
up to 15 minutes for
them to cool down.
Only then switch the
unit back on.
If the fault persists, call
on the services of a
trained electrician.

11. Spare parts

Orders for spare parts: Always state
i
the print no. 0185.0886.0007 of
these instructions, the production date
(stamp on housing) and the relevant
item number from chapter 3.1.
Spare parts are shown in bold.
12. Dismantling
Danger to life from electric
shock
 Switch the mains fuse off.
DANGER
● Dismantling should only be carried out
by a trained electrician.
13. Disposal
Do not dispose of in domestic
i
waste
The unit contains in part material that
can be recycled
and in part substances that should not
end up as domestic waste.
 Dispose of the unit once it has reached the
end of its working life according to the
regulations valid where you are.
11