GRAUPNER JULES VERNE Instructions De Montage page 29

106 Stern flagstock 2
107 Ventilator
108 Forward handrail
109 Roof railing
110 Mast 3
111 Radar support 1
112 Transverse support
113 Radar bearer strut
114 Lamp bearer
115 Anchor light bearer
116 Hinge plates
117 Stern lamp bearer
118 Stern lamp bearer strut 1
119 Radar housing 2
120 Radar antenna 1
121 Boat lamps
122 Anchor light
123 Throttle lever
124 Telephone handset
125 Foghorn
126 Windscreen wiper
127 Lifebelt holder 1
128 Lifebelt 1
129 Railing stanchion
130 Handrails
131 Bottom rail
132 Forward flagstock
133 Top cover plate 1
134 Cleats 8
135 Fairleads
136 Navigation lamp bracket, left
137 Navigation lamp bracket, right 1
138 Navigation lamps
139 Velcro (hook-and-loop) tape
- Loudspeaker box
The Parts List includes components which are not contained in the kit; these must be obtained separately.
You will also need the following items (not included in the kit)
2 x SPEED 600 BB Turbo electric motors, Order No. 3302
1 x suppressor capacitor, Order No. 3588 (pack of 2)
1 x NAVY V 40 R speed controller, Order No. 2875
2 x SANYO 6N-4000 DRL drive batteries, Order No. 2516
1 x G2 distributor cable, Order No. 3068
1 x G2 parallel cable, Order No. 3061
1 x copper flex, 2 m, Order No. 3389
2 x G2 connector systems, Order No. 2989
Radio control system
1 x MC-10 radio control set, Order No. 4721
or
1 x MC-12 radio control set, Order No. 4725
Other Graupner/JR FM computer radio control systems on the 40 MHz band can also be used.
GRAUPNER GmbH & Co. KG D-73230 KIRCHHEIM/TECK GERMANY
Keine Haftung für Druckfehler. Technische Änderungen vorbehalten!
Plywood
6 Plastic Ready made
2 Plywood
2 Plywood
Plywood CNC-trimmed, 2.0 mm
Plywood
1 Plywood
1 Plywood
2 ABS 1.0 mm, make from scrap
1 ABS
2 ABS 1.0 mm, make from scrap
1 ABS
ABS
Plastic Ready made
Plastic Ready made
3 Plastic Ready made
1 Plastic Ready made
2 Plastic Ready made
1 Plastic Ready made
1 Plastic Ready made
3 Plastic Ready made
ABS Vac.-moulded, 1.0 mm
Plastic Ready made
26 Plated brass
2 Beech Flexible wood strip, 5 x 2 mm, overlength
2 Braided wire
1 Beech 3 Ø x 70 mm, taper as shown
ABS 1.0 mm, make from scrap
Plastic Ready made
8 Plastic Ready made
1
2 Plastic Ready made
1
1 ABS
Laser-processed, 1.0 mm
CNC-trimmed, 2.0 mm
CNC-trimmed, 2.0 mm
Laser-processed, 2.0 mm
Laser-processed, 1.0 mm
Laser-processed, 1.0 mm
1.0 mm, make from scrap
1.0 mm, make from scrap
1.0 mm, make from scrap
Ready made, some require shortening
0.1 mm Ø, overlength
ABS 1.0 mm, make from scrap
ABS 1.0 mm, make from scrap
Plastic Ready made, overlength
Vac.-moulded, 2.0 mm
ID# 47496
29
10/2003