Safety Precautions - Chauvin Arnoux C.A 406 Notice De Fonctionnement

English
Thank you for purchasing an Analogue Multimeter C.A 406.
For best results from your instrument:
•
read this user manual carefully,
•
comply with the precautions for use.
SYMBOLS

Put the instrument in a perfectly stable position (horizontal or at an angle on
its fold-away stand).

Check that the needle is correctly set to the zero mark (mechanical
adjustment screw at the centre of the instrument).

On resistance measurement, check that electrical zero is set (calibration
potentiometer next to Ω ranges).

Make sure that the leads are connected in accordance with the polarity of the
instrument.

If the order of magnitude of the measurement is not known, place the switch
on the highest range then progressively lower the range to get a more precise
measurement. The reading must preferably be done in the upper 2/3 of the
scale.

A range is correctly selected only if the switch is placed exactly on this range.

Clean the case with a soft cloth without solvent.
20
The rubbish bin with a line through it indicates that, in the
European Union, the product must undergo selective
disposal in compliance with Directive WEEE 2002/96/EC.
This equipment must not be treated as household waste.
WARNING, risk of DANGER! The operator must refer to
this user's manual whenever this danger symbol appears.
The CE marking indicates conformity with European
directives, in particular LVD and EMC.
Equipment protected by double insulation.

SAFETY PRECAUTIONS

C.A 406