Safety Précautions - Chauvin Arnoux PAC 12 CVH Mode D'emploi

Thank you for purchasing a Clamp for oscilloscope. To get the best service from this
instrument:
read this user's manual carefully and respect the safety precautions detailed
Meaning of the symbol
Warning ! Please refer to the User's Manual before using the instrument.
In this User's Manual, the instructions preceded by the above symbol, should they not be
carried out as shown, can result in a physical accident or damage the instrument and the
installations.
Only use the clamp indoors.
Do not expose the clamp to running water.
Do not use the clamp on uninsulated conductors at a voltage of more than 600 V in
relation to the earth.
For measurements on DC current, check zero output. Adjust if necessary (see " Operating
procedure ").
During measurement, ensure that the conductor is in line with the markings on the jaws
and that the clamp closes correctly.
Your clamp is supplied with a set of adhesive labels. Choose the label for your language
and stick it to the back of the case.
Our guarantee is applicable for twelve months after the date on which the equipment is
made available (extract from our General Conditions of Sale, available on request).
Oscilloscope Clamp PAC 12 CVH ........................................................... P01.1200.72
Supplied with a 9 V alkaline battery, a set of labels in 5 languages
to stick to the instrument, and a User Manual.
Spare:
- 9 V alkaline battery (6LF22) .....................................................................
ENGLISH
SAFETY PRÉCAUTIONS
WARRANTY
TO ORDER
1 0
Ref.
P01.1006.20