Quickly Reducing The Volume (Mute); Telephone Audio/Navigation Audio - Blaupunkt John Deere MP36 Notice D'emploi Et De Montage

Volume
Note:
To protect your hearing, the power-on
volume is limited to the value "38". If
the volume before switching off was
higher and the "LAST VOL" setting was
selected, the device switches on again
with the value "38".
When you have finished making your chang-
es,

press the MENU button twice 9.
Quickly reducing the volume
(Mute)
You can quickly reduce the volume to a pre-
set level (Mute).

Briefly press button 1.
"MUTE" appears on the display.
Cancelling mute
To return to your previously set volume
level,

briefly press button 1 again.
Adjusting the mute level
You can adjust the mute level.

Press the MENU button 9.

Press the or button : repeat-
edly until "MUTE LVL" appears on the
display.
 Adjust the mute level with the but-
tons :.
When you have finished making your chang-
es,
 press the MENU button twice 9.

Telephone Audio/Navigation
Audio
If your car sound system is connected with
a cell phone or navigation system, the car
sound system is muted when you "pick up"
the phone or during a voice output of the
navigation and the call or the voice output
is played back via the car sound speaker
system. For this purpose, the cell phone or
the navigation system must be connected
to the car sound system as described in the
installation instructions.
Your Blaupunkt dealer can provide you with
the information which navigation system
can be used with your car sound system.
If a traffic announcement is received dur-
ing a telephone call or a voice output of the
navigation, you can listen to the traffic an-
nouncement only after the telephone call/
voice output has ended, provided that it is
still being broadcast. The traffic announce-
ment is not recorded!
You can adjust the volume with which you
switch on the telephone calls or the voice
output of the navigation.

Press the MENU button 9.
 Press the or button : repeatedly
until "TEL VOL" appears on the display.
 Set the desired volume with the or
button :.
When you have finished making your chang-
es,

press the MENU button twice 9.
Note:
Using the volume control 3, you can
adjust the volume for telephone calls
and voice output directly during the
playback.