Setting The Timer Manually - SilverCrest SKGET 2000 A1 Mode D'emploi

NOTE
► If you do not press any button for 60 minutes, the appliance automatically
switches to standby mode.
4) You can make custom settings at any time:
Setting the grill temperature manually:
Use the +/‒ buttons G to set a temperature between 80 and 240°C. After a
♦
few seconds, you will hear a beep and the appliance starts to heat up to the set
temperature. The temperature display I will again show the current temperature
of the hotplates q. As soon as the set temperature is reached, you will hear
several beeps and the temperature display I lights up continuously.

Setting the timer manually:

NOTE
► The timer function cannot be used at the same time as the grill thermo-
meter r.
Press the Timer button H and use the +/‒ buttons G to set a grilling
♦
time between 1 and 60 minutes.
NOTE
To adjust the grill temperature, press the timer button H again or wait
►
until you hear the beep.
After a few seconds, you will hear a beep and the appliance starts to
heat up.
The timer does not start until the appliance has heated up to the set grill
temperature. The remaining grilling time is shown as a countdown on the
time display J.
As soon as the timer has expired, the appliance beeps continuously.
Press any button to turn off this alarm.
NOTE
► From the last minute onwards, the countdown is displayed in one-second
increments.
► The appliance does not switch off automatically after the timer has
elapsed and continues to operate unchanged. This allows you to
grill different types of food at the same time without interruption.
SKGET 2000 A1
GB │ IE │ 11 ■