Button Lock Function; Using Udirect 2 With Fm - Unitron uDirect 2 Ensemble Guide

More remote control information:
Your hearing aids may beep to confirm that
your selection was applied.
Both hearing aids are controlled at the same
time.
Please ask your hearing healthcare professional
to print your personal uDirect 2 report.
The available hearing aid programs and
volume levels are set by your hearing
healthcare professional.

Button lock function

The access ( ) button on your uDirect 2 can
be locked to avoid inadvertent presses. To lock
the button, press and hold the connect (
Home ( ) buttons simultaneously. The power
indicator light will flash red 3 times to indicate
that the buttons have been locked.
Press and hold the connect (
buttons simultaneously again to unlock the buttons.
You will still be able to answer an incoming
telephone call using the access ( ) button while
it is locked.
26
) and
) and Home ( )
The power indicator is lit as long as you press
a uDirect 2 button. Green confirms a good
uDirect 2 battery state, red indicates that you
need to charge the uDirect 2 battery.
2 minutes after unplugging the neckloop both
indicator lights will switch off and the uDirect 2
disconnects Bluetooth to save power.
Operating distance
If uDirect 2 is used as a handheld
remote control (without neckloop):
Maximum distance 80 cm/32''
Hold uDirect 2 as shown
Using uDirect 2 with FM
uDirect 2 can be used together with
FM equipment.
1. Place the FM transmitter near
the sound source and turn it ON.
2. Turn the FM receiver ON if required.
3. uDirect 2 must be switched ON
and worn correctly.
27