Disconnecting Your Bluetooth Device; Showing Bluetooth Information On The Display; The Perfectpro Stereo Pairing Feature; Setting Up The First Speaker - PERFECTPRO NETBOX Mode D'emploi

● [System settings]: Select this option to go to the
System settings menu and configure the radio (refer
to chapter 14 "Using the System settings menu" for
details).
● [Main menu]: Select this option to go back to the
Main menu, where you can switch to any of the radio's
modes or set the radio's alarms or sleep timer, or go to
the System settings menu (refer to chapter 15 "Using
the Main menu" for details).

Disconnecting your Bluetooth device

To disconnect your Bluetooth device, either turn off
Bluetooth on the Bluetooth device, press and hold the
Tuning knob on the radio to switch over to the pairing
mode (the Bluetooth indicator will blink blue), or switch to
another mode on the radio by pressing the Source button
or by using the radio's Main menu. If you disconnect the
Bluetooth device when the radio is in the Bluetooth mode,
the radio's display will show "No connect" and the radio
will be available for pairing again.
Showing Bluetooth information on the
display
When listening to Bluetooth audio, repeatedly press
the Info / Menu button to cycle through the following
information on the radio's display:
● Artist
● Album
● Title

The PerfectPro Stereo Pairing Feature

Stereo Pairing (also known as True Wireless Stereo or
TWS) is a feature that allows two speakers to wirelessly
connect with each other and an audio device to play music
in stereo without the need for any cables. Your NETBOX
can be wirelessly connected to a second NETBOX and an
audio device to play music through both speakers at the
same time.

Setting up the first speaker

1.
Make sure the first speaker is in Bluetooth mode and
connect to a Bluetooth device as described in chapter
10 "Listening to Bluetooth audio".
2. Press the Stereo pairing button to enter the Stereo
pairing mode.

Setting up the second speaker

1. Make sure the second speaker is in Bluetooth mode
and that it has not connected to a Bluetooth device.
2. Press the Stereo pairing button to enter the Stereo
pairing mode.
After the speakers have successfully connected, the
first speaker will display "Lead Stereo". The second
speaker will display "Follow Stereo".
Notes:
● Set up the second speaker within 1 minute of the
first one, otherwise the setting of the first speaker
will be canceled.
● When both speakers are connected to the same
Bluetooth device, the Stereo Pairing feature cannot
be set. In this case, you need to disconnect the
Bluetooth connection of one of the speakers to set
up the Stereo Pairing feature.

Starting playback

1. Start playback on the connected Bluetooth device and
adjust the volume on the Bluetooth device or one of the
speakers for comfortable listening.
Note:
Volume, Tone control (Bass, Mid and Treble) and
Loudness setting of one speaker is reflected on the
other.
2. Use the controls on your Bluetooth device to play /
pause and navigate tracks. Alternatively, control the
playback using the Play / Pause, Next and Previous
buttons on either speaker.
3. Press and hold the Next or Previous button on either
speaker to fast forward or rewind within the current
track. Release the button when the desired point is
reached.
Note:
Not all player applications or devices may respond to
all of these controls.

Switching the audio mode

When using two speakers, you can switch between
"Stereo", "Left" and "Right" mode. Press the L/R button on
either of the speakers to change the audio mode.
"Stereo" mode: Both speakers play the same sound.
This is the default setting.
"Left" / "Right" mode: One speaker plays the sound on
the left channel, while the other speaker plays the sound
on the right channel for
speakers.
Disconnecting the PerfectPro Stereo Pairing
connection
Press and hold the Stereo pairing button for 2-3 seconds
to disconnect the Stereo Pairing feature.
11. Listening to audio from a USB device or
charging a USB device
The NETBOX is capable of playing MP3 file from USB
devices in the Music player mode.

Playing files from a USB device

To listen to audio files from a USB device, follow these
steps:
1. Turn on the radio using the Power button.
2. Open the USB port's rubber cover on the right side of
the radio and insert the USB device in the USB port.
3. The radio will now briefly display the message "USB
disk attached - Open folder?". Rotate the Tuning knob
to select [Yes] and press the Tuning knob to confirm to
directly browse the USB device and continue at step 6.
If you have selected [No] or didn't respond in time to
this message, continue at step 4.
stereo playback between the
GB
13