Operating Your Radio - Dab; Selecting A Station - Dab - PERFECTPRO DAB+Pro Mode D'emploi

Operating your radio – DAB
1. Press the Power On/Off button to switch on your radio.
2. Press the Source button to select DAB band.
3. If this is the first time the radio is used, a quick scan of Band III DAB channels will be carried out. If the
radio has been used before, the last used station will be selected.
4. During Autotune, as new stations are detected, the station counter on the right hand side of the display
will increase and stations will be added to the list. The display shows a bar graph indicating progress
of autotune.
5. When the Autotune is completed, the first station (in numeric-alpha order 0...9...A...Z) will be selected.
6. If the station list is still empty after the Autotune, your radio will display "No DAB Station".
7. If no signals are found, it may be necessary to relocate your radio to a position giving better reception.
Note:
That radio station name and frequency displays shown in this user guide may differ from those that
you see on your radio. Broadcasters may change radio station names that are transmitted, and the
frequencies used for DAB and FM radio stations may not be the same in all parts of the country.
Selecting a station – DAB
1. Press the Power On/Off button to switch on your radio.
2. Press and release the Source button until the DAB mode is selected. The display will show the name
of the radio station currently selected.
3. Rotate the Tuning control knob to scroll through the list of available stations.
4. Press and release the Tuning control knob to select the station. The display may show "Connecting..."
while your radio finds the new station.
5. Adjust the Volume control to the required setting.
Note: If after selecting a station, the station is not found it may be necessary to relocate your radio to a
position giving better reception.
Secondary service – DAB
1. Certain radio stations have one or more secondary services associated with them. If a station has a
secondary service associated with it, the display will show ">>" next to the station name on the station
list. The secondary service will then appear immediately after the primary service as you rotate the
Tuning control knob.
2. Press and release the Tuning control knob to select the station. Most secondary services do not broadcast
continually and if the selected service is not available, the radio will re-tune to the associated primary
service.
GB
6