Setting The Sleep Timer; Warranty - PERFECTPRO NETBOX Mode D'emploi

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Setting the sleep timer

The sleep timer allows you to automatically turn off the
radio after a preset time has elapsed. It can be set from
15 to 60 minutes using the [Sleep] option from the Main
menu.
Follow the steps below to set the sleep timer using the
radio's Main menu:
1.
Open the Main menu using the three steps previously
described.
2.
Select [Sleep] and press the Tuning knob.
3.
Rotate the Tuning knob to select the desired sleep time.
4.
Press the Tuning knob or wait several seconds to
enable the sleep timer with the selected time.
5.
After the sleep time has elapsed, the radio will
automatically switch to the Standby mode. An active
sleep timer is shown using a sleep timer icon in the
bottom bar of the radio's display.
6.
To cancel the sleep time before the preset time has
elapsed and to turn off the radio, press the Power
button to turn off the unit manually. To cancel the sleep
timer and leave the radio playing, go back into the sleep
timer settings (steps 1 to 3 above) and select the option
"Sleep OFF" in step 3.

16. Warranty

This radio comes with a 2 year limited warranty.
WARNING! Warranty becomes void once the radio cabinet
has been opened or any modifications or alterations to the
radio have been made!
The terms of the warranty of this radio do not cover the
following:
● Damage caused by misuse, abuse, neglect, alterations,
accidents or unauthorized repair.
● Normal wear and tear.
● Batteries.
Never open the device casing. The manufacturer will not
accept any liability for damage resulting from improper
handling. The type plate is located on the back of the
device.
GB
17

Publicité

Table des Matières
loading

Table des Matières