Important Safety Instructions; Introduction; Overview Of The Main Unit - PERFECTPRO NETBOX Mode D'emploi

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

1. IMPORTANT SAFETY INSTRUCTIONS

1.
Read these instructions.
2.
Keep these instructions.
3.
Heed all warnings.
4.
Follow all instructions.
5.
Do not use this apparatus near water.
6.
Clean only with dry cloth.
7.
Do not block any ventilation openings. Install in
accordance with the instructions.
8.
Do not install near any heat sources such as radiators,
heat registers, stoves or other apparatus (including
amplifiers) that produce heat.
9.
Protect the power cord from being walked on or
pinched particularly at plug, convenience receptacles,
and the point where they exit from the apparatus.
GB
10.
Only use attachments / accessories specified by the
manufacturer.
11.
Use only with the cart, stand, tripod, bracket, or
table specified by the manufacturer, or sold with the
apparatus. When a cart is used, use caution when
moving the cart / apparatus combination to avoid
injury from tip-over.
12.
Unplug this apparatus during lightning storms or when
unused for long periods of time.
13.
Refer all servicing to qualified service personnel.
Servicing is required when the apparatus has been
damaged in any way, such as power supply cord or
plug is damaged, liquid has been spilled or objects
have fallen into the apparatus, the apparatus has
been exposed to rain or moisture, does not operate
normally, or has been dropped.
14.
To reduce the risk of fire or electric shock, do
not expose this appliance to Rain or Moisture.
For outdoors use, to avoid electric shock, only use
batteries power during a raining day or the weather is
wet. This apparatus is provided with protection against
splashing water and dust ingress (IP64).
15.
The Shock Hazard Marking and Associated Graphical
Symbol is provided on the back of unit.
16.
Apparatus shall not be exposed to dripping or
splashing and no objects filled with liquids, shall be
placed on the apparatus.
17.
The power plug should be close to the radio, and
easy to be approached that during the emergency, to
disconnect the power from the radio, just unplug the
power plug from the AC power slot.
Notice: The changes or modifications not expressly
18.
approved by the party responsible for compliance
could void the user 's authority to operate the
equipment.
19.
Where the MAINS plug or an appliance coupler is
used as the disconnect device, the disconnect device
shall remain readily operable.
04
20.
A warning that batteries (battery pack or batteries
installed) shall not be exposed to excessive heat such
as sunshine, fire or the like.
21.
To prevent possible hearing damage, do not
listen at high volume levels for long periods.
22.
The symbol indicates AC voltage.
The symbol indicates DC voltage.
The symbol indicates class II equipment.
Warning
To avoid replacement of a battery with an incorrect
type.
Don't disposal of a battery into fire or a hot oven, or
mechanically crushing or cutting of a Battery.
Don't leaving a battery in an extremely high
temperature surrounding environment.
To avoid battery subjected to extremely low air
pressure.

2. Introduction

Your NETBOX
The NETBOX is a very versatile radio that allows you to:
● Listen to FM, DAB and Internet radio as well as
Podcasts;
● Enjoy audio from Spotify, USB devices, Bluetooth
devices and other devices featuring an audio output;
● Pair two NETBOX radios with a playback device for
PerfectPro Stereo Pairing;
● Set alarms in order to use the radio as an alarm clock;
● Fall asleep listening to audio using a sleep timer;
Before using this device, please make sure to read and
understand all parts of the manual.

Overview of the main unit

Volume / Loudness / Tone knob
1
● Rotate to control the radio's volume level.
● Press to enable / disable the radio's Loudness
feature.
● Press and hold to configure the radio's Tone
control.
Tuning / Select / Seek / Bluetooth pairing knob
2
● While in FM radio mode, rotate to increase /
decrease the frequency.
● While in FM radio mode, rotate and then press and
hold to automatically scan for stations with a lower
/ higher frequency.
● While in the radio's menus, rotate to select items
in and then press to confirm your choice.
● While in Bluetooth mode, press and hold to switch
to the Bluetooth pairing mode.
● While in Music player mode, press and hold to add
tracks to your personal playlist.

Publicité

Table des Matières
loading

Table des Matières