Using The Main Menu; Setting The Alarms - PERFECTPRO NETBOX Mode D'emploi

4. The radio's display will show the time and date and
the day digits are blinking on the display.
5. Rotate the Tuning knob to select the current day and
press the Tuning knob to confirm.
6.
Next, the month digits will blink on the display.
7.
Rotate the Tuning knob to select the current month
and press the Tuning knob to confirm.
8. Next, the year digits will blink on the display.
9. Rotate the Tuning knob to select the current year and
press the Tuning knob to confirm.
10. Next, the hour digits will blink on the display.
11. Rotate the Tuning knob to select the current hour and
press the Tuning knob to confirm.
12.
Next, the minute digits will blink on the display.
13.
Rotate the Tuning knob to select the current minutes
and press the Tuning knob to confirm.
GB
14. Manually setting the time is now completed and the
radio will return to the Time / Date submenu.

15. Using the Main menu

The Main menu can be used to select the radio's mode
or to set the alarms and sleep timer of the radio. Follow
these steps to access the Main menu:
1. Turn on the radio using the Power button.
2. Press and hold the Info / Menu button to open the menu
for the current mode.
3.
Rotate the Tuning knob to
s e l e c t [ M a i n m e n u ] a n d
press the Tuning knob to
open the menu.
The Main menu offers the
following options:
● [Internet radio]: Select this option to switch to the
Internet radio mode.
● [Podcasts]: Select this option to switch to the
Podcast mode.
● [Spotify]: Select this option to switch to the Spotify
mode.
● [Music player]: Select this option to switch to the
Music player mode.
● [DAB]: Select this option to switch to the DAB radio
mode.
● [FM]: Select this option to switch to the FM radio
mode.
● [Bluetooth]: Select this option to switch to the
Bluetooth mode.
● [AUX in]: Select this option to switch to the AUX in
mode.
● [Sleep]: Select this option to set the radio's sleep
timer.
● [Alarms]: Select this option to set the radio's alarms.
16
Main menu
Internet radio
Podcasts
Spotify
Music player
DAB
● [System settings]: Select this option to go to the
System settings menu (refer to chapter 14 "Using the
System settings menu" for more information on this
menu).

Setting the alarms

Your NETBOX features 2 alarms that can be set using the
[Alarms] option from the Main menu.
Follow these steps to set the radio's alarms:
1. Open the Main menu using the three steps previously
described.
2. Select [Alarms] and press the
Tuning knob.
Both alarms and their settings
will be shown on the display:
3. Rotate the Tuning knob to
select the desired alarm and
press the Turning knob to
confirm.
The submenu for configuring
an alarm offers the following
options:
● [Enable]: Select this option to configure the alarm
frequency, the available settings here are [Off],
[Daily], [Once], [Weekends] and [Weekdays].
● [Time]: Select this option to set the alarm time. This
can be done in the same way as setting the time and
date in the previous chapter.
● [Mode]: Select this option to set the mode that is
used for the alarm.
● [Preset]: Select this option to select a preset or the
last listened station as the alarm source.
● [Volume]: Select this option to set the alarm volume.
● [Save]: Select this option to save the alarm settings.
4. Set all the first five of the above options using Tuning
knob.
5. Select [Save] and press the Tuning knob.
6. To configure the other alarm, select this alarm in step 3
and repeat steps 4, 5.
Notes:
● When an alarm sounds, press the Power button to
turn off the alarm and switch the radio back to the
Standby mode. Repeatedly press any of the other
buttons on the radio to snooze the alarm for the
number of minutes displayed on the radio's display.
● Alarms will stop sounding after 60 minutes have
elapsed since the start of the alarm.
Alarms
Alarm 1: Off [00:00]
Alarm 2: Off [00:00]
Alarm 1
Enable: Off
Time: 00:00
Mode: Internet radio
Preset: Last listened
Volume: 32