Pairing Bluetooth With Your Mobile Phone; Playing Music From Your Mobile Phone; Display Modes; Device List - Connect To The Paired Device - PERFECTPRO Teambox TBX1 Manuel De L'utilisateur

WiFi networks and cordless phones generally use similar radio frequencies to Bluetooth
and may interfere with one another. If any interference is noticed, then try relocating the
Teambox or one of the other devices.
The Bluetooth capabilities of your Teambox enable it to receive audio from many
Bluetooth capable devices including mobile phones, personal computers and tablets.
Only one Bluetooth device can be connected to your Teambox at a time. It supports the
following Bluetooth profiles and functionality.
• Your Teambox supports A2DP (Advanced Audio Distribution Profile) which is a
audio connection that streams music from PCs, mobile phones etc. SBC and AAC
audio codecs are supported.
• Your Teambox supports AVRCP (Audio Video Remote Control Profile) that allows
your radio to control music playback from the connected device.
•
Note: Some mobile phones may temporarily disconnect from your Teambox when
you make or receive calls. Some devices may temporarily mute their Bluetooth audio
streaming when they receive text messages, emails or for other reasons unrelated to
audio streaming. Such behaviour is a function of the connected device and does not
indicate a fault with your Teambox.

Pairing Bluetooth with your mobile phone

1. Press the Power button to turn on the radio.
2. Select Bluetooth mode by pressing the Source button.
3. The LCD display will show "Connecting" when radio is not yet paired with your
mobile phone. At the same time, the Bluetooth icon will be blinking as the Bluetooth
is in searching mode.
4. In your mobile phone open the Setting menu and select Bluetooth, then select
"Teambox" in the Bluetooth devices list (Bluetooth pairing instructions may vary per
type of mobile phone, please check your mobile phone manual).
5. When Bluetooth pairing is successful, the LCD display will show the name of the
mobile device. At the same time, the Bluetooth icon will be lightened.
6. After that, the LCD display will show the connected mobile phone's name to indicate
the connected device to the radio.

Playing music from your mobile phone

1. Press the Power button to turn on the radio.
2. Select Bluetooth mode by pressing the Source button.
3. Start playing music by using the media players in the paired mobile phone.
4. Playback can be controlled from the mobile phone or by pressing the Preset / ►||,
Tuning <<, and Tuning >> buttons on the radio.
5. After music playback started, the name of the song will be displayed in the LCD.
15

Display modes

In Bluetooth mode, the radio can display a range of information of the current playing
music on the display. Press the Select / Info button to cycle through the various types.
a. Title Displays scrolling song's name of the current playback music.
b. Artist Displays the artist's name of the current playback music.
c. Album Displays the album name of current playback music.
d. Time and date Display the current time and date.
Device List – Connect to the paired device
In the radio, you can select the Bluetooth device from the device list to connect again.
The device names would be shown if the name of the Bluetooth devices were configured
in the mobile devices. Please refer to the user manual of your mobile device for the
configurations.
The device lists can be checked as below:
1. In Bluetooth mode, press the Menu button to enter the system setting. The display
will show "Discoverable".
2. Press the Tuning << or Tuning >> button until "Device list" is displayed; press the
Select / Info button to select the setting.
3. Press the Tuning << or Tuning >> button to view the name of the devices.
4. Press the Select / Info button to start Bluetooth reconnection. The radio will
automatically connect to this mobile device.
Note: There can be up to 8 device names to be stored in the speaker. If there are more
than 8 mobile devices have been connected and stored into the speakers, the earliest
paired device name will be erased.
Note: If you have ever deleted the "Teambox" from your connected mobile device, the
auto reconnection will be unsuccessful.
Restart Bluetooth pairing
The Bluetooth function can be set to operate in different ways as below:
1. In Bluetooth mode, press the Menu button to enter the system setting. The display
will show "Discoverable", press the Select / Info button to activate Bluetooth
discovery function.
2. The LCD display will show "Connecting", and the Bluetooth icon will be flashing at
the same time. Now, the radio's Bluetooth is free for any mobile phone connection
as it is in discoverable mode now.
Note: "Discoverable" is the option that forces the Bluetooth of this radio to disconnect
from your mobile phone and enter the "discoverable mode". This is the way to allow
the Bluetooth pairing to another device. If no new device is paired, the Bluetooth will
automatically try to connect to the last device when it is switched off and on again.
GB
GB
16