Using Bluetooth; Pairing Bluetooth With Your Mobile Device; Playing Music From Your Mobile Device - PERFECTPRO Bluetube Manuel De L'utilisateur

User Safety Precautions
Check the room temperature range is 0°C – 45° C (32° - 113° Fahrenheit) before charging the battery.
l
Do not attempt to disassemble the plastic covering or any parts of the device, as the materials inside may be toxic and may
l
damage skin and clothes.
Do not puncture, crush, modify, throw or cause any unnecessary shock to your battery, as the battery used in this device may
l
present a risk of fire, explosion, or chemical burn if mistreated.
l Do not leave, charge or use the battery in a car under direct sunlight, near fire or a heated source.
l Do not immerse, throw, wet the battery in water/ seawater.
Do not use or charge the battery if it appears to be abnormally hot, discoloration, deformation or abnormal conditions is detected
l
during use, charge or storage.
Do not leave a charging battery unattended. Keep the battery away from babies and children.
l

USING BLUETOOTH

Pairing Bluetooth with your mobile device

It is necessary to first pair your Bluetooth device (e.g. phone or tablet) with your Bluetube speaker before you can play/stream
Bluetooth music through your Bluetube. Paring creates a `bond' so the two devices can recognize each other and interact.
1. Press the On/Off button to turn on the Bluetube speaker.
2. Select Bluetooth mode by pressing the Source / Lock button.
3. The LCD display will show "Connecting" and the Bluetooth connected LED on the front will be blinking when Bluetube is not
yet paired with your mobile device.
4. In your mobile device open the Setting menu and select Bluetooth, then select "Bluetube" in the Bluetooth devices list
(Bluetooth pairing instructions may vary per type of mobile device, please check your mobile device manual).
5. When Bluetooth pairing is successful, the Bluetooth connected LED will stop blinking and the LCD display will show
"Connected" in the 1st line, and your mobile's name in the 2nd line for about 2 seconds.
6. Next the LCD display will continuously show the connected mobile device's name in the 1st line to indicate the connected device
to the Bluetube speaker.
9
NOTE: If your mobile device cannot be connected to the Bluetube speaker by Bluetooth, please delete "Bluetube" from your mobile
device's list and pair to the Bluetube speaker again. For how to remove the existing Bluetube speaker called "Bluetube" from your
mobile device, please read the user manual of your mobile device for further assistance.
NOTES:
1) Bluetooth connectivity performance will very much also depend on the connected Bluetooth source devices. Please refer to the
Bluetooth capabilities of your device before connecting to your Bluetube speaker. All features may not be supported on some
paired Bluetooth source devices.
2) The effective operation range between the Bluetube speaker and the paired device is approximately 10 meters (30 feet). Any
obstacle between the system and the device can reduce the operational range. Some mobile devices may have a shorter
Bluetooth connection/transmission range.
3) Not all player applications or devices may respond to the navigation control buttons.
4) With some mobile devices, making/receiving calls, text messages, e-mails or any other activities unrelated to audio streaming
may mute the Bluetooth audio streaming or even temporarily disconnect from your device. Such behavior is a function of the
connected device and does not indicate a fault in your Bluetube speaker.

Playing music from your mobile device

1. Press the On/Off button to turn on the Bluetube speaker.
2. Select Bluetooth mode by pressing the Source / Lock button.
3. Start playing music by using the media players in the paired mobile device.
4. Playback can be controlled from the mobile device or by pressing the
5. After music playback started, the name of the song will be displayed in the LCD (if available and compatible).
, , and button on the Bluetube speaker.
GB
10